A Bayesian approach to robust identification: application to fault detection

Author

Fernández Canti, Rosa Ma.

Director

Puig Cayuela, Vicenç

Codirector

Blesa Izquierdo, Joaquim

Date of defense

2013-02-07

Legal Deposit

B. 16897-2013

Pages

216 p.



Department/Institute

Universitat Politècnica de Catalunya. Departament de Teoria del Senyal i Comunicacions

Abstract

In the Control Engineering field, the so-called Robust Identification techniques deal with the problem of obtaining not only a nominal model of the plant, but also an estimate of the uncertainty associated to the nominal model. Such model of uncertainty is typically characterized as a region in the parameter space or as an uncertainty band around the frequency response of the nominal model. Uncertainty models have been widely used in the design of robust controllers and, recently, their use in model-based fault detection procedures is increasing. In this later case, consistency between new measurements and the uncertainty region is checked. When an inconsistency is found, the existence of a fault is decided. There exist two main approaches to the modeling of model uncertainty: the deterministic/worst case methods and the stochastic/probabilistic methods. At present, there are a number of different methods, e.g., model error modeling, set-membership identification and non-stationary stochastic embedding. In this dissertation we summarize the main procedures and illustrate their results by means of several examples of the literature. As contribution we propose a Bayesian methodology to solve the robust identification problem. The approach is highly unifying since many robust identification techniques can be interpreted as particular cases of the Bayesian framework. Also, the methodology can deal with non-linear structures such as the ones derived from the use of observers. The obtained Bayesian uncertainty models are used to detect faults in a quadruple-tank process and in a three-bladed wind turbine.

Subjects

621.3 Electrical engineering; 68 - Industries, crafts and trades for finished or assembled articles

Documents

TRFC1de1.pdf

8.581Mb

 

Rights

ADVERTIMENT. L'accés als continguts d'aquesta tesi doctoral i la seva utilització ha de respectar els drets de la persona autora. Pot ser utilitzada per a consulta o estudi personal, així com en activitats o materials d'investigació i docència en els termes establerts a l'art. 32 del Text Refós de la Llei de Propietat Intel·lectual (RDL 1/1996). Per altres utilitzacions es requereix l'autorització prèvia i expressa de la persona autora. En qualsevol cas, en la utilització dels seus continguts caldrà indicar de forma clara el nom i cognoms de la persona autora i el títol de la tesi doctoral. No s'autoritza la seva reproducció o altres formes d'explotació efectuades amb finalitats de lucre ni la seva comunicació pública des d'un lloc aliè al servei TDX. Tampoc s'autoritza la presentació del seu contingut en una finestra o marc aliè a TDX (framing). Aquesta reserva de drets afecta tant als continguts de la tesi com als seus resums i índexs.

This item appears in the following Collection(s)