Obtención de estructuras calcopirita (CIGS) y kesterita (CZTS) como absorbentes para dispositivos fotovoltaicos de capa fina mediante métodos de síntesis de bajo coste

Author

Martí Valls, Rafael

Director

Carda Castelló, Juan B.

Stoyanova Lyubenova, Teodora,

Date of defense

2016-12-19

Pages

228 p.



Department/Institute

Universitat Jaume I. Departament de Química Inorgànica i Orgànica

Doctorate programs

Programa de Doctorat en Ciències

Abstract

La presente tesis se basa en la obtención de materiales absorbentes para dispositivos fotovoltaicos de capa fina. Los compuestos absorbentes estudiados han sido Cu(In0,7Ga0,3)Se2 (CIGS, calcopirita) y Cu2ZnSn(Se1-x,Sx)4 (CZTS, kesterita). En ella se han desarrollado diversos métodos químicos de obtención (sin vacío) como solvotermal/hidrotermal, sol-gel, hot-injection/ non-injection y co-precipitación de selenitos. Los materiales obtenidos han sido caracterizados estructuralmente, morfológicamente y composicionalmente a través de diversas técnicas como DRX, FRX, MEB/EDX, MET, XPS, GDOES, Uv-Vis-NIR y Raman. También han sido medidas sus propiedades ópticas (medidas del band GAP). Las capas obtenidas por el método de co-precipitación (CIGS y CZTS) han sido ensambladas dentro de células solares y medidas también sus propiedades eléctricas, así como ensayado la influencia del sodio (por difusión desde el sustrato y por adición externa de NaI) y de distintos contacto metálicos (molibdeno mono y tri-capa) y sustratos (SLG y BSG) sobre estas.


This thesis is based on obtaining absorbent materials for thin film photovoltaic devices. The absorbent compounds studied have been Cu(In0,7Ga0,3)Se2 (CIGS, chalcopyrite) and Cu2ZnSn(Se1-x,Sx)4 (CZTS, kesterite). In the thesis has been developed several chemical methods of synthesis as solvothermal/hydrothermal, sol-gel, hot-injection/non-injection and selenites co-precipitation. The obtained materials have been characterized structurally, morphologically and compositionally via techniques as XRD, XRF, SEM/TEM, XPS, GDOES, Uv-Vis-NIR and Raman. The optical properties have been measured too (band GAP measurements). Obtained layers by precipitation route (CIGS and CZTS) have been assembled within solar cells and measured their electrical properties. Also has been studied the influence of sodium (by diffusion from the substrate and by external addition of NaI) and different metallic back contacts (molybdenum mono and tri-layer) over this electrical properties.

Keywords

CIGS; CZTS; Solar; Métodos químicos; Fotovoltaicos; Bajo coste; Photovoltaics; Low cost

Subjects

62 - Engineering. Technology in general; 620 - Materials testing. Commercial materials. Power stations. Economics of energy

Knowledge Area

Energia solar

Documents

2016_Tesis_Marti Valls_Rafael.pdf

6.956Mb

 

Rights

L'accés als continguts d'aquesta tesi queda condicionat a l'acceptació de les condicions d'ús establertes per la següent llicència Creative Commons: http://creativecommons.org/licenses/by-sa/4.0/
L'accés als continguts d'aquesta tesi queda condicionat a l'acceptació de les condicions d'ús establertes per la següent llicència Creative Commons: http://creativecommons.org/licenses/by-sa/4.0/

This item appears in the following Collection(s)