Ara mostrant els elements 1-10 de 14
Puñet Ortiz, Xavier (Data de defensa: 2016-01-26)
Intelligent scaffolds are designed to trigger the healing regeneration process through the controlled released or disposition of bioactive signals. The fabrication of intelligent scaffolds needs the ...
Flamant, Quentin (Data de defensa: 2016-07-20)
Debido a sus excelentes propiedades mecánicas y una excelente biocompatibilidad, el uso de las cerámicas de base de circona en aplicaciones dentales y ortopédicas ha crecido rápidamente durante las ...
Gedler Chacón, Gabriel Eduardo (Data de defensa: 2016-07-12)
The goal of this research was to determine the relations between processing, structure and properties of polycarbonate-graphene nanoplatelets (PC-GnP) foams. Using two different foaming processes (in ...
Sefer, Birhan (Data de defensa: 2016-09-29)
This thesis covers investigation of the surface phenomena of Ti-6Al-4V and Ti-6Al-2Sn-4Zr-2Mo alloys related with oxidation at elevated temperature and corrosion during chemical treatment in hydrofluoric-nitric ...
Fraioli, Roberta (Data de defensa: 2016-11-14)
Despite being biocompatible and with adequate mechanical properties for application as a bone replacement material, titanium lacks osteoinductive capacity, i.e. it supports new bone growth on its surface ...
Cailloux, Jonathan (Data de defensa: 2016-01-21)
The purpose of this PhD thesis was to investigate the sensitivity of the rheological, thermal, mechanical and fracture behaviours on the topological changes induced in two commercial PLA grades. PLA ...
Yang, Jing, 1988- (Data de defensa: 2016-05-31)
This thesis assesses the influence of substrate surface integrity on different mechanical (flexural strength and contact damage resistance under spherical indentation) and tribological (scratch resistance ...
Doroudgarian, Newsha (Data de defensa: 2016-03-18)
The presented work is a part of the ongoing effort on the development of high performance bio-based composites with enhanced durability, under static and dynamic mechanical loading including the exposure ...
Melk, Latifa (Data de defensa: 2016-05-20)
In the last decades there has been growing interest in developing ceramic materials with high fracture toughness (Klc) and strength for structural applications. In the specific case of 3 mol% yttria-doped ...
Akbarzadeh, Ebrahim (Data de defensa: 2016-10-20)
The metal matrix composites (MMC) are widely used in different applications and offer high strength-to-weight ratio. In this thesis, it was developed a novel method to fabricate composite material in ...