Mostrando ítems 1-8 de 8
Xie, Haibing (Fecha de defensa: 2016-11-21)
Cu2ZnSn(S,Se)4 (CZTSSe) kesterite semiconductors have been proposed as a potential medium to long term replacement of Cu(In,Ga)(S,Se)2 (CIGS) chalcopyrites for sustainable cost-efficient thin film ...
Fontané Sánchez, Xavier (Fecha de defensa: 2013-12-10)
El trabajo se ha centrado en el análisis del compuesto Cu2ZnSnS4 (CZTS) mediante la técnica de espectroscopia de dispersión Raman, para una mayor optimización de los procesos de crecimiento de capas ...
Calvo Barrio, Lorenzo (Fecha de defensa: 1999-07-16)
The goal of this dissertation is the study and characterisation of high dose Carbon (C) implantation processes into Silicon (Si) and related materials for the synthesis of Silicon Carbide (SiC). The ...
Neuschitzer, Markus (Fecha de defensa: 2016-09-29)
Nowadays mono- and multicrystalline silicon have the highest market share of all PV technologies but thin film solar cells based on CdTe or Cu(In,Ga)Se2 (CIGS) absorbers recently show promising high ...
Insignares, Cristina (Fecha de defensa: 2015-11-13)
The main objective of this thesis is the development of Raman scattering based methodologies for the analysis of advanced electrodeposition-based CIGS technologies, with the identification and ...
Dimitrievska, Mirjana (Fecha de defensa: 2015-12-21)
The main objective of this thesis is to deepen the knowledge of fundamental properties of kesterite materials (Cu2ZnSnS4 and Cu2ZnSnSe4) and their solid solutions Cu2ZnSn(S,Se)4, which are used as ...
Álvarez García, Jacobo (Fecha de defensa: 2002-04-19)
CuInS2 is a good candidate as photovoltaic absorber for the fabrication of high efficient and low cost solar cells. In this work, the vibrational properties of CuInS2 films have been studied by means ...
Fairbrother, Andrew (Fecha de defensa: 2014-05-07)
Thin film solar cell technologies are rapidly developing, and chalcopyrite (Cu(In,Ga)Se2) based devices have demonstrated the highest power conversion efficiencies on the laboratory scale. However, in ...